All Collections
How to Destroy Packaging Run Waste
How to Destroy Packaging Run Waste
Andrew Day avatar
Written by Andrew Day
Updated over a week ago

Through the Packaging Run Waste sub-tab, a QA Technician can destroy waste from a specific Packaging Run associated with a Bulk Lot. This may be necessary if product is spilled or otherwise contaminated during packaging.

Required permission(s): production_read, destruction_lot_read, packaging_run_update

  1. In the Productions module, select a production.

    [img production-profile]

  2. Select a Bulk Lot. This opens the Bulk Lot's Profile.

    [img bulk-lot-overview]

  3. Open the Destruction tab.

    [img bulk-lot-destruction]

  4. Open the Packaging Run Waste sub-tab.

  5. Click Record New Destruction to open the New Packaging Run Waste modal.

  6. Select a Packaging Run.

    • If destroying waste from an active Packaging Run:

      1. Open the Active Packaging Runs sub-tab. It should be open by default.

      2. Select a Packaging Run for destruction.

    • If destroying waste from a closed Packaging Run:

      1. Open the Closed Packaging Runs sub-tab.

      2. Select a Packaging Run for destruction.

    • To select a Packaging Run by ID number:

      1. Open the Select by ID sub-tab.

      2. Enter the Packaging Run's ID number in the field provided.

      3. Click Next.

  7. Enter information about the destruction in the fields provided.

    • Weight: The total weight (g) of the destroyed material.

    • Volume: The total volume (ml) of the destroyed material. This field only appears if the Bulk Lot's type is Extracts, Topicals, or Edibles - Non-solids.

    • Discrete Units: The quantity of discrete units to destroy. This field only appears if the Bulk Lot uses discrete units as a unit of measure.

    • Reason: The reason for the destruction.

    • Substance Destroyed: The substance to be destroyed.

    • Destruction Lot: The Destruction Lot and Sublot that will house the destroyed material.

  8. Click Create to save the destruction.


The Destruction tab also allows QA Technicians to destroy General Bulk Lot Waste, Bottles, and Retained Samples.

Did this answer your question?